> News > Industry News

Industry News

How to provide data for wind farms for wind tower manufacturers

Similarly, if the wind speed pole is not firmly fixed, and the direction of the pole moves from the windward side or the windward side to the windward side, the position is vulnerable to the shadow effect of the tower anemometer and the reliability of the wind speed data will also change.

Specific steps for installing lightning arrester

First, quality inspection according to the standard. Lightning protection works should be timely shade inspection according to the progress of the project.

How to choose the site of the monitoring tower

The monitoring tower is mainly used for human observation or electronic monitoring in the factory and important management areas.

What are the structural characteristics of the monitoring tower

Monitoring tower in the use of survival has a positive effect whether it is anti-theft, communication is still in the forest fire are inseparable from the monitoring tower, now the market is engaged in monitoring tower production of countless companies

How do I install a lightning Arrester

One: If the arrester is bought by you, you can ask the manufacturer to teach. If it's your cheap one, look at the standard atlas. The weight of arrester is generally 300kg for two saving, 600kg for three saving, 870kg for four saving and 1200kg for five saving.

This section describes how to install the wind tower

Wind tower device: determine the anchor point of the base, the base plate point, and then screw into the ground anchor, digging pit. In case of poor soil quality, the use of concrete pouring essentials for digging pits.

<...7 8 9 10 11...13 >